2017 Ford Escape Bolt Pattern & Wheel Specs

By Don St Germain, owner of a 2017 Ford Escape SE Updated August 27, 2026
2017 Ford Escape bolt pattern: the commonly cataloged wheel fitment is 5 x 108 mm. For replacement wheels, bolt pattern is only one part of fitment, so also confirm center bore, offset, wheel width, load rating, tire clearance and the correct wheel hardware for the exact wheel.

I made this page as the wheel-fitment reference I would want beside me when comparing wheels for Alice, our 2017 Escape SE. The important point is that a wheel can share the same 5 x 108 pattern and still be the wrong wheel for the Escape.

Main wheel fitment numbers

Item2017 Escape referenceWhat to know
Bolt / lug pattern5 x 108 mmThe wheel needs five mounting holes on a 108 mm pitch circle.
Center bore63.4 mm is commonly catalogedThe wheel must clear and properly locate around the hub.
Wheel fastenerM12 x 1.5Ford lists this fastener size in the 2017 wheel specification.
Ford wheel torque100 lb-ft (135 N·m)See the dedicated Ford-sourced torque reference before any wheel service.

The bolt-pattern and center-bore values are handy when shopping, but I still use the wheel manufacturer's vehicle-fitment catalog before ordering. Aftermarket wheel designs can require different seat shapes or vehicle-specific hardware even when the basic dimensions look right.

Common factory tire and wheel combinations

Depending on trim and equipment, 2017 Escapes are commonly seen with 17-, 18- and 19-inch wheel packages. Tire sizes seen across the range include 235/55R17, 235/50R18 and 235/45R19. The tire-information placard on the specific Escape is the best starting point for the size and pressure that vehicle was built with.

If you are comparing replacement fasteners, see 2017 Ford Escape lug nut size and wheel torque specs. If a normal socket no longer fits the original-style wheel nuts, see 2017 Ford Escape swollen lug nuts. If you are comparing replacement tires rather than wheels, see the 2017 Ford Escape tire-size and pressure guide.

Offset and wheel width affect fitment too

Offset changes where the wheel sits relative to the hub, suspension and body. A wheel that moves too far inward can reduce suspension clearance, while one that moves too far outward can create body clearance and steering-geometry problems. Wheel width affects those clearances too.

That is why I would not choose an aftermarket wheel from bolt pattern alone. A wheel retailer or qualified tire shop should be able to confirm the complete fitment for the 2017 Escape and the exact tire size being used.

What are hub-centric rings?

Some aftermarket wheels are made with a larger center opening so one wheel design can fit several vehicles. A correctly sized hub-centric ring may be specified by the wheel manufacturer to match that wheel to the Escape's hub. The need for a ring depends on the wheel itself, so it is not something every replacement wheel automatically needs.

Original-style lug nuts can swell

One wheel issue does not show up in a fitment chart: the capped original-style lug nuts can become distorted as they age. That happened on Alice. The outside of the lug nuts swelled enough that the normal socket became extremely difficult to use.

If the socket that used to fit suddenly will not slide on properly, do not assume the thread size changed. See the swollen lug nut guide for the owner-reported problem and what I experienced, then use the lug nut size page for Ford's actual M12 x 1.5 fastener specification.

Wheel torque is a separate specification

The 5 x 108 bolt pattern tells you how the mounting holes are arranged. It does not tell you the wheel-fastener torque. Ford lists 100 lb-ft (135 N·m) for the original-style M12 x 1.5 fasteners on the 2017 Escape.

Because wheel retention is safety-critical, I keep the official specification and Ford's notes on a separate 2017 Ford Escape wheel torque page. That page is a reference only, not a jacking or wheel-removal tutorial.

Before buying used or aftermarket wheels

Safety: Wheel fitment affects steering, braking, tire clearance and wheel retention. I use these numbers for research and shopping, then have uncertain aftermarket fitments confirmed by a qualified wheel/tire shop before they go on the vehicle.
Ford specification reference