2017 Ford Escape Coolant Type & Capacity
| Engine | Ford coolant capacity | 2017 manual specification |
|---|---|---|
| 1.5L EcoBoost | 12.5 qt (11.8 L) | WSS-M97B44-D2 |
| 2.0L EcoBoost | 10.4 qt (9.8 L) | WSS-M97B44-D2 |
| 2.5L | 11.3 qt (10.7 L) | WSS-M97B44-D2 |
Why I list the Ford specification instead of just a coolant colour
Colour alone is not a dependable way to identify coolant chemistry. Ford's 2017 manual identifies the required specification, which is a better reference when checking a product or service invoice.
The original North American manual names Motorcraft Orange Prediluted Antifreeze/Coolant for these engines and ties it to specification WSS-M97B44-D2. Ford has changed coolant products over the years, so when servicing an older vehicle I would confirm the current Ford-approved replacement by specification or VIN rather than shop by colour alone.
Total capacity is not the same as a top-up amount
The numbers above are published system capacities. They are useful for identifying the size of the cooling system, but they do not tell you how much fluid a particular vehicle needs after a partial drain or minor top-up.
When a low coolant level needs more attention
If the coolant level keeps falling without an obvious explanation, see the separate 2017 Ford Escape coolant-intrusion guide. Ford published engine-specific service bulletins for certain 1.5L and 2.0L EcoBoost Escapes with low coolant, white exhaust smoke and rough-running symptoms.
- The level repeatedly drops after being corrected
- There is visible residue or wetness around the reservoir, hoses or cooling system
- The engine temperature rises above normal
- The heater output changes unexpectedly along with a low level
- A warning message or check-engine light appears
A recurring loss is more important than the amount needed to top up once. It can point to a leak or another cooling-system problem that should be diagnosed.
If the coolant level is stable but warm-up or temperature behavior seems wrong, see 2017 Ford Escape thermostat symptoms. For broader fluid information, see fluids and capacities. For engine-specific reliability concerns, see the reliability guide.